Analytical and testing services
Rev. 13/09/2019 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
AEM001 | Gasoline Emission Test (Type I), Tailpipe | TIS 2540-2554 | Chassis Dynamometer | 20 liters | 29,000 |
AEM002 | Gasoline Emission Test (Type IV), Evaporative | TIS 2540-2554 | SHED Chamber | 20-30 liters | 65,000 |
AEM003 | Bi-fuel CNG Emission Test (Type I), Tailpipe | TIS 2540-2554 | Chassis Dynamometer | 20 liters | 29,000 |
AEM004 | CNG Emission Test (Type I), Tailpipe | TIS 2555-2554 | Chassis Dynamometer | 20 liters | 29,000 |
AEM005 | Gasoline and Diesel Vehicle Emission Test, Tailpipe | ECE R83 Rev.4-5 (Euro 5 and Euro 6) |
Chassis Dynamometer | 20 liters | 50,000 |
AEM006 | Diesel Vehicle Emission Test, Tailpipe | TIS 2155-2546 | Chassis Dynamometer | 20 liters | 47,000 |
AEM007 | Diesel Vehicle Emission Test, Tailpipe | TIS 2550-2554 | Chassis Dynamometer | 20 liters | 47,000 |
AEM008 | Motorcycle Emission Test, Tailpipe | TIS 2350-2551 | Chassis Dynamometer | 20 liters | 25,500 |
AEM009 | Motorcycle Emission Test, Evaporative | TIS 2350-2551 | SHED Chamber | 5-10 liters | 36,000 |
AEM010 | Energy Consumption | TIS 2335-2558 | Chassis Dynamometer | 20 liters | 50,000* |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
* Fees depends on vehicle type
Rev. 01/07/2013 (general customers)
Code | Test details | Procedure | Test tool | Fee (baht) |
---|---|---|---|---|
HEM001 | Engine Performance Test | According to ETC Test (Sweep Mode) | Dynamometer | 12,000* |
HEM002 | The European Transient Cycle (ETC) - with Analyzer | TIS 2320-2552 | Dynamometer | 27,000* |
HEM003 | The European Transient Cycle (ETC) - without Analyzer | ETC | Dynamometer | 10,000* |
HEM004 | The European Stationary Cycle (ESC) - with Analyzer | TIS 2315-2551 | Dynamometer | 27,000* |
HEM005 | The European Load Response (ELR) | TIS 2315-2551 | Dynamometer | 10,000* |
HEM006 | Test Run & Engine Calibration - with Analyzer | Customer | Dynamometer | 3,000** (per hour) |
HEM007 | Test Run & Engine Calibration - without Analyzer | Customer | Dynamometer | 2,000** (per hour) |
1. Fees exclude VAT;
2. Fees are subject to change without prior notice
* Fees exclude engine installation, test laboratory rentals, and test fuels
**HEM006 & HEM007 are hourly rates
Rev. 13/09/2019 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
FPE001 | Engine Performance Test | ECE R85 | Engine Dynamometer | - | 16,200* |
FPE002 | Intake Valve Deposit Test | CEC F-20-98 | Mercedes-Benz M111 | 400 liters | 218,400 |
FPE003 | Diesel Injector Fouling Test | CEC F-98-08 | Peugeot DW-10 | 800 liters | 234,000** |
FPE004 | Research Octane Number (RON) | ASTM D2699 | CFR-F1 | 2 liters | 10,000 |
FPE005 | Motor Octane Number (MON) | ASTM D2700 | CFR-F2 | 2 liters | 10,000 |
FPE006 | Cetane Number (CN) | ASTM D613 | CFR-F5 | 5 liters | 14,100 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
* Fees exclude engine installation, test laboratory rentals, and test fuels
** Fees are based on reused injectors permitted by the Working Group
Rev. 01/07/2013 (general customers)
Code | Test details | Eddy-Current Dynamometer | AC Dynamometer | ||
---|---|---|---|---|---|
Light-Duty | Heavy-Duty | Light-Duty | Heavy-Duty | ||
TB105/TB107 TB110/TB112 | TB116 | TB106/EM109 TB102/TB113 | EM108 | ||
EPD001 | Test Bed Rental (baht a day) | 4,500 | 4,500 | 9,000 | 9,000 |
EPD002 | Engine Operation (baht per hour) | 1,500 | 1,750 | 1,750 | 2,000 |
EPD003 | Additional Support Technician (baht per hour) | 300 | 300 | 300 | 300 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Rev. 15/05/2020 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
LUB-03-008 | API gravity, Density, Relative density | ASTM D4052 | Density meter | 20 ml | 1,600 |
LUB-01-006 | Aniline Point | ASTM D611 | Aniline point tester | 40 ml | 3,600 |
LUB-04-001 | Ash content | ASTM D482 | Furnace | 10 ml | 3,000 |
LUB-01-009 | Base Oil Composition | ASTM D2007 | Glassware, Heater | 25 grams | 11,500 |
LUB-02-015 | Breakdown voltage | IEC 60156/ ASTM D877/ ASTM D1816 |
Dielectric Strength Detector | 1,000 ml | 2,000 |
LUB-04-002 | Brookfield Viscosity | ASTM D2983 | Brookfield viscometer | 100 ml | 5,000 |
LUB-02-019 | Carbon-Type Composition (CA, CN, CP) | ASTM D2140 | Calculation | 100 ml | 6,500 |
LUB-02-020 | Cleanliness code | ISO 4406/NAS 1638 | Particle counter | 100 ml | 3,200 |
LUB-04-003 | Cold cranking simulator viscosity, (CCS) | ASTM D5293 | Cold cranking simulator | 150 ml | 3,000 |
LUB-04-005 | Color, ASTM scale | ASTM D1500 | Colorimeter | 100 ml | 700 |
LUB-04-008 | Copper strip corrosion | ASTM D130 | Corrosion Bath | 100 ml | 1,800 |
LUB-02-001 | Demulsibility | ASTM D2711 | Demulsibility tester | 1,000 ml | 8,800 |
LUB-04-033 | Elemental analysis, Mapping analysis | In-house method | Electron Probe Microanalyzer, EPMA | 1 grams | 3,800 |
LUB-04-032 | Elemental analysis, Qualitative analysis | In-house method | Electron Probe Microanalyzer, EPMA | 1 grams | 7,500 |
LUB-04-014 | Evaporative loss | ASTM D6375 | Thermogravimetric Analyzer (TGA) | 5 grams | 3,000 |
LUB-04-016 | Flash point, COC | ASTM D 92-18 | Automatic Flash point, COC | 300 ml | 1,800 |
LUB-03-015 | Flash point, PMCC | ASTM D93 (Procedure A) |
Automatic Flash point,PMCC | 300 ml | 1,700 |
LUB-04-009 | Foaming characteristics (Seq. I, II, III) | ASTM D892 | Foaming tester | 500 ml | 2,500 |
LUB-02-022 | Four Ball EP for Lubricating oil (weld point) |
ASTM D2783 | Four Ball EP tester | 150 ml | 8,600 |
LUB-02-024 | Four Ball EP for Lubricating oil (Weld Point & Load Wear Index) |
ASTM D2783 | Four Ball EP tester | 500 ml | 10,000 |
LUB-01-007 | Four Ball Wear for Lubricating oil | ASTM D4172 | Four ball wear tester | 100 ml | 4,000 |
LUB-04-010 | High temperature Foaming characteristics (Seq. IV) |
ASTM D6082 | Foaming tester | 250 ml | 2,800 |
LUB-04-018 | High Temperature High Shear Viscosity @ 100 oC |
ASTM D6616 | Tapered bearing simulator viscometer |
150 ml | 4,000 |
LUB-04-017 | High Temperature High Shear Viscosity @ 150 oC |
ASTM D4683 | Tapered bearing simulator viscometer | 150 ml | 4,000 |
LUB-04-031 | Hot tube test (High temperature deposit) |
JPI-5S-55-99 | Komatsu Hot tube tester | 50 ml | 9,000 |
LUB-04-011 | Pentane-Toluene Insolubles, without coagulant |
ASTM D893 (Procedure A) |
Centrifuge | 30 ml | 2,500 |
LUB-04-012 | Pentane-Toluene Insolubles, with coagulant |
ASTM D893 (Procedure B) |
Centrifuge | 350 ml | 2,600 |
LUB-02-016 | Interfacial Tension | ASTM D971 | Tensiometer | 500 ml | 1,500 |
LUB-02-026 | Kinematic and Dynamic Viscosity | ASTM D7042 | Stabinger Viscometer | 20 ml | 1,800 |
LUB-04-004 | Kinematic Viscosity | ASTM D445-17a | Automatic viscometer | 100 ml | 1,800 |
LUB-04-029 | Metal content (Wear metal in used oil and Additive elements in unused lubricanting oil) |
ASTM D5185 | ICP-AES | 5 ml | 3,300 |
LUB-04-028 | Metal content (Additive elements in lubricating oil and Additive package) |
ASTM D4951 | ICP-AES | 5 ml | 3,300 |
LUB-03-022 | Micro carbon residue (MCRT) | ASTM D4530 | Micro Carbon Residue Tester (MCRT) | 20 ml | 2,200 |
LUB-04-013 | MRV viscosity | ASTM D4684 | Mini-Rotary Viscometer (MRV) | 30 ml | 12,000 |
LUB-02-018 | Oxidation Stability (PDSC) | ASTM D6186 | Pressure Differential Scanning Calorimeter (PDSC) |
1-5 grams | 4,500 |
LUB-01-005 | Oxidation stability (RPVOT), Oil bath | ASTM D2272 (Procedure A) |
Rotating Pressure Vessel Oxidation tester (RPVOT) |
150 grams | 7,300 1) |
LUB-02-010 | Oxidation stability (RPVOT), Dry bath | ASTM D2272 (Procedure B) |
Rotating Pressure Vessel Oxidation tester (RPVOT) |
150 grams | 7,300 2) |
LUB-02-028 | Oxidation Stability (TOST) at 5,000 hrs. | ASTM D943 | Turbine oxidation stability tester | 700 ml | 352,000 |
LUB-02-017 | Polycyclic Aromatic Hydrocarbons (PAHs) | EN16143 | GC-MS | 1-5 grams | 10,000 |
LUB-04-022 | Pour point | ASTM D5950 | Automatic pour point tester | 200 ml | 2,500 |
LUB-02-027 | Refractive index | ASTM D1218/ ASTM D1747 |
Refractrometer | 10 ml | 1,000 |
LUB-02-008 | Rust Preventive Characteristics, Distilled water |
ASTM D665 (Method A) |
Rust preventive tester | 1,000 ml | 4,000 |
LUB-01-001 | Rust Protection (Humidity Cabinet) @ less than 1 month |
ASTM D1748 | Humidity Cabinet | 500 ml | 24,000 |
LUB-01-002 | Rust Protection (Humidity Cabinet) 1 month | ASTM D1748 | Humidity Cabinet | 500 ml | 46,000 |
LUB-01-003 | Rust Protection (Humidity Cabinet) 2 month | ASTM D1748 | Humidity Cabinet | 500 ml | 92,000 |
LUB-01-004 | Rust Protection (Humidity Cabinet) 3 month | ASTM D1748 | Humidity Cabinet | 500 ml | 138,000 |
LUB-02-009 | Shear stability, KRL | CEC L-45-99 | KRL Tapered Roller Bearing Tester Status Surveillancetester |
100 ml | 12,000 |
LUB-04-023 | Shear stability @ 30 cycles (Orbahn) | ASTM D6278 | Shear stability tester (Orbahn) | 1,000 ml | 5,500 |
LUB-04-015 | Soot content | ASTM D5967 (Annex A4) |
Thermogravimetric Analyzer (TGA) | 1 ml | 3,000 |
LUB-04-024 | Sulfated ash content | ASTM D874 | Furnace | 10 ml | 3,000 |
LUB-02-029 | Sulfur content, WD-XRF | ASTM D2622 | Wavelenght Dispersive X-Ray Fluorescense (WD-XRF) |
100 grams | 3,400 |
LUB-02-003 | Timken OK Load for Lubricating Oil | ASTM D2782 | Timken tester | 4,000 ml | 26,000 |
LUB-04-025 | Total acid number (TAN) | ASTM D664 | Potentiomatic titrator | 20 ml | 1,500 |
LUB-04-027 | Total base number (TBN), Hydrochloric acid | ASTM D4739 | Potentiomatic titrator | 10 ml | 1,500 |
LUB-04-026 | Total base number (TBN), Perchloric acid | ASTM D2896 | Potentiomatic titrator | 10 ml | 1,500 |
LUB-04-006 | Water content (KFC) | ASTM D6304 (Procedure C) |
Karl Fischer coulometric titrator | 10 ml | 1,500 |
LUB-04-007 | Water content (KFV) | ASTM E203 | Karl Fischer volumetric titrator | 50 ml | 1,500 |
LUB-02-012 | Water separability | ASTM D1401 | Water separability tester | 100 ml | 2,500 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
1) for hydraulic oil and turbine oil
2) for base oil and compressor oil
Rev. 17/09/2013 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
MET010 | Four Ball EP | ASTM D 2783 | Four Ball EP Tester | 100 ml | 8,600 |
MET011 | Four Ball Wear | ASTM D 4172 | Four Ball Wear Tester | 50 ml | 6,300 |
MET012 | FZG Gear Test Rig | ASTM D 5182 | FZG Gear Tester | 3,000 ml | 120,000 |
MET013 | FZG Gear Test Rig | ASTM D 4998 | FZG Gear Tester | 3,000 ml | 120,000 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Rev. 15/05/2020 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
GRE-02-025 | Cone Penetration One-Quarter and One-Half Scale Cone |
ASTM D1403 | Penetrometer | 200-500 grams | 1,900 |
GRE-02-005 | Cone Penetration, Prolonged Worked at 100,000 double stroke |
ASTM D217 | Penetrometer | 1 kilogram | 5,200 |
GRE-01-011 | Cone Penetration, Unworked | ASTM D217 | Penetrometer | 1 kilogram | 2,100 |
GRE-01-010 | Cone Penetration, Worked | ASTM D217 | Penetrometer | 1 kilogram | 2,200 |
GRE-01-013 | Copper Corrosion of grease | ASTM D4048 | Oven | 100 grams | 2,000 |
GRE-02-002 | Dropping Point | ASTM D2265 | Dropping Point tester | 50 grams | 1,800 |
GRE-02-007 | Oil Separation (Conical Sieve) | ASTM D6184 | Oven | 100 grams | 2,800 |
GRE-02-006 | Oxidation of grease | ASTM D942 | Oxidation of grease tester | 200 grams | 10,500 |
GRE-02-011 | Roll stability | ASTM D1831 | Roll stability tester | 500 grams | 5,500 |
GRE-02-004 | Timken OK Load for grease | ASTM D2509 | Timken tester | 5,000 grams | 26,000 |
GRE-02-013 | Water spray off | ASTM D4049 | Water spray off tester | 100 grams | 2,600 |
GRE-02-014 | Water washout | ASTM D1264 | Water washout tester | 50 grams | 3,500 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Rev. 15/05/2020 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
COR-1-001 | Thermal stability test (Corrosion Inhibitor) |
In house method | Oven, Glass Vessel, Potentiostat |
250 ml | 34,500 |
COR-1-002 | Compatibility test | In house method | High Pressur High Temperature Reactor |
500 ml | 14,100 |
COR-1-003 | Bubble test | - BP ESR.95.ER.054 - ASTM G170-06 |
Bubble Tester | 50 ml | 20,000 |
COR-1-004 | Emulsion test | ASTM G170-06 | Emulsion Tester | 50 ml | 8,500 |
COR-1-005 | Solubility test | ASTM G170-06 | Solubility Tester | 50 ml | 8,500 |
COR-1-006 | Foaming test | ASTM G170-06 | Foaming Tester | 50 ml | 8,500 |
COR-1-007 | Corrosion Inhibitor Performance Test at High Pressure High Temperature Condition |
ASTM G111-97 | Rotating blade autoclave | 50 ml | 100,000 |
COR-1-008 | Corrosion Test at High Pressure High Temperature Condition (First and Last day) price per day |
ASTM G111-97 | Rotating blade autoclave | depend on testing detail |
6,000 |
COR-1-009 | Corrosion Test at High Pressure High Temperature Condition (Other operating days) price per day |
ASTM G111-97 | Rotating blade autoclave | depend on testing detail |
4,300 |
COR-1-010 | Corrosion Test at High Pressure High Temperature Condition (Yearly fee) |
ASTM G111-97 | Rotating blade autoclave | depend on testing detail |
1,100,000 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Rev. 15/05/2020 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
ADS-7-045 | Mercury sidestream unit rental fee (gas phase) price per month |
- | - | - | 41,100 |
ADS-7-046 | Mercury sidestream unit rental fee (liquid phase) price per month |
- | - | - | 63,600 |
ADS-7-047 | Chloride sidestream unit rental fee (gas phase) price per month |
- | - | - | 46,300 |
ADS-7-048 | Chloride sidestream unit rental fee (gas/liquid phase) price per month |
- | - | - | 115,600 |
ADS-7-049 | Chloride sidestream unit rental fee (liquid phase) price per month |
- | - | - | 93,400 |
ADS-7-050 | Mercury lab scale unit rental fee (gas phase) price per month |
- | - | - | 25,000-28,800 |
ADS-7-051 | Chloride lab scale unit rental fee (gas phase) price per month |
- | - | - | 59,600-174,000 |
ADS-7-055 | Service fees for routine analysis from mercury sidestream unit (gas phase) price per month |
In-house method | Hg Analyzer | 5 liters | 10,300-15,400 |
ADS-7-056 | Service fees for routine analysis from chloride sidestream unit (gas phase) price per month |
- | Gastec Tube | - | 24,300-57,600 |
ADS-7-057 | Service fees for routine sampling from sidestream unit (liquid phase) price per month |
- | - | - | 4,100 |
ADS-7-058 | Service fees for routine analysis from mercury lab scale unit (gas phase) price per month |
In-house method | Hg Analyzer | 10 liters | 9,300-24,900 |
ADS-7-059 | Service fees for routine analysis from chloride lab scale unit (gas phase) price per month |
- | Gastec Tube | - | 28,600-85,800 |
ADS-7-060 | Service fees for adsorbent packing/unpacking (sidestream reactor) price per Reactor |
- | - | 2 liters | 4,500 |
ADS-7-061 | Service fees for adsorbent packing/unpacking (lab scale reactor) price per Reactor |
- | - | 500 ml | 1,300 |
ADS-8-070 | Sevice fees for spent adsorbent analysis from mercury sidestream unit (gas phase) price per Reactor |
In-house method | - | - | 36,400 |
ADS-8-071 | Sevice fees for spent adsorbent analysis from mercury sidestream unit (liquid phase) price per Reactor |
In-house method | - | - | 34,000 |
ADS-8-072 | Sevice fees for spent adsorbent analysis from chloride sidestream unit (gas phase) price per Reactor |
In-house method | - | - | 56,100 |
ADS-8-073 | Sevice fees for spent adsorbent analysis from chloride sidestream unit (liquid phase) price per Reactor |
In-house method | - | - | 47,700 |
ADS-8-074 | Sevice fees for spent adsorbent analysis from chloride lab scale unit (gas phase) price per Reactor |
In-house method | - | - | 9,400 |
ADS-8-075 | Sevice fees for spent adsorbent analysis from mercury lab scale unit (gas phase) price per Reactor |
In-house method | - | - | 18,200 |
ADS-8-076 | Loss on drying analysis | In-house method | Drying Oven | 50 grams | 600 |
ADS-8-077 | Carbon/ Hydrogen/ Nitrogen content analysis |
In-house method | Elemental Analyzer | 10 grams | 1,600 |
ADS-8-078 | Sulfur content analysis | In-house method | Elemental Analyzer | 5 grams | 2,000 |
ADS-8-079 | Chloride content analysis | UOP 291 | - | 20 grams | 3,700 |
ADS-8-080 | Mercury content analysis | In-house method | ICP | 10 grams | 2,300 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Rev. 15/05/2020 (general customers)
Code | Test details | Procedure | Test tool | Sample volume | Fee (baht) |
---|---|---|---|---|---|
AMI-9-082 | Amine solvent performance test by dynamic unit |
In-house method | - | 2 liters | 26,100 |
AMI-9-083 | Foaming test from amine solvent | In-house method | Glassware | 1 liter | 900 |
AMI-9-084 | Amine solvent regeneration test | In-house method | - | 1 liter | 49,700 |
AMI-9-086 | H2S content analysis from amine solvent | SMS 304-10 | - | 50 ml | 2,300 |
AMI-9-087 | pH analysis from amine solvent | - | Auto Titrator | 100 ml | 600 |
1. Fees exclude VAT
2. Fees are subject to change without prior notice
Contact:
Innovation Strategic Planning and Management Department, PTT Innovation Institute
Tel. 0-2537-3000 ext. 18191 or 0-3524-8191
- Sectoral Scope
1. Energy industries 2. Energy distribution 3. Energy demand 4. Manufacturing industries5. Chemical industry6. Transport7. Carbon capture and storage of CO2 in geological formations - T-VER Validation & Verification Process
- Request for T-VER Service
Contact:
Environmental Innovation and Carbon Solutions Department, PTT Innovation Institute
E-mail: korfun.b@pttplc.com
Tel. 0-2537-3000 ext. 18151 or 0-3524-8151